Largest Counties by Population in the United States

Biggest Counties by Population in the United States Forty-three districts in the United States have a populace more noteworthy than 1 million, positioned by populace. The information for this rundown depends on mid-2016 populace gauges from the United States Census Bureau. In 2010, just 39 areas in the United States had a populace of more than 1 million, and Los Angeles County had less than 10 million occupants. The best five rundown continues as before as in 2010.â From this rundown, you can see that albeit a significant part of the countrys populace is moved in the megalopolis district of the Northeast, there is extensive populace in the metropolitan locales of the Sun Belt from Texas to California. These intensely populated urban communities of Texas, Arizona, and California keep on encountering incredible development as populace decreases in places like the Rust Belt continue.â Biggest Counties by Population Los Angeles County, CA: 10,116,705Cook County, IL: 5,246,456Harris County, TX: 4,441,370Maricopa County, AZ: 4,087,191San Diego County, California: 3,263,431Orange County, California: 3,145,515Miami-Dade County, Florida: 2,662,874Kings County, New York: 2,621,793Dallas County, Texas: 2,518,638Riverside County, California: 2,329,271Queens County, New York: 2,321,580San Bernardino County, California: 2,112,619King County, Washington: 2,079,967Clark County, Nevada: 2,069,681Tarrant County, Texas: 1,945,360Santa Clara County, California: 1,894,605Broward County, Florida: 1,869,235Bexar County, Texas: 1,855,866Wayne County, Michigan: 1,764,804New York County, New York: 1,636,268Alameda County, California: 1,610,921Middlesex County, Massachusetts: 1,570,315Philadelphia County, Pennsylvania: 1,560,297Suffolk County, New York: 1,502,968Sacramento County, California: 1,482,026Bronx County, New York: 1,438,159Palm Beach County, Florida: 1,397,710Nassau County, New York: 1,358,627Hillsborough C ounty, Florida: 1,316,298 Cuyahoga County, Ohio: 1,259,828Orange County, Florida: 1,253,001Oakland County, Michigan: 1,237,868Franklin County, Ohio: 1,231,393Allegheny County, Pennsylvania: 1,231,255Hennepin County, Minnesota: 1,212,064Travis County, Texas: 1,151,145Fairfax County, Virginia: 1,137,538Contra Costa County, California: 1,111,339Salt Lake County, Utah: 1,091,742Montgomery County, Maryland: 1,030,447Â Mecklenburg County, North Carolina: 1,012,539Pima County, Arizona: 1,004,516Â St. Louis County, Missouri: 1,001,876

3 Types of Errors in Treatment of Numbers

Year of Wonders Essay

The plague draws out the best in the town. Do you concur? All through the plague year huge numbers of the locals were influenced by the awful hit of the plague. One of the primary topics in the novel ‘’fear’’ is something that profoundly influences the activities and can totally change their qualities and ethics. Dread which comes complimentary with the torment and can draw out the best and the most noticeably terrible in the residents. Times of emergency can draw out a beast in each one of us, however can a simply like jon said â€Å"these times they do make beasts of us all†lso yet conditions such as this can likewise draw out the good.As the plague hit Anna’s town absence of logical and clinical data lead the townspeople to reach their own inferences and strange notions, of the plague. We see dread and feelings assume responsibility for the townspeople through the lynching of Anys Gowdie, by the furious crowd. the crazed crowd which blames Anys for black magic just embodies the thought that confidence can dazzle individuals alongside dread. This occasion was inappropriate and terrible. The locals were put under a changeless condition of pressure and fear, which drove individuals to do some frightful activities and carry on in unfeeling ways.In her final words Anys scrutinizes the town and assaults them for their obliviousness instead of proclaiming an affection for God, which may have spared her. Through these activities Brooks can investigate the quality of one’s convictions and ethics in troubling circumstances. Anna anyway isn't blinded by her confidence like the vast majority of the residents and doesn't accept that the plague is a demonstration of God, or black magic and just infers that it was welcomed on commonly. maybe the plague was neither verification God nor the Devil however basic a thing in nature as the stone on which we stub a toe† here Anna give her first indications of abandonment, quest ion confidence and shows the advancement of her new mentality This complements how Anna is astute past her time and her rationale permits her to thrive in this sad chain of occasions. Times of emergency and the plague can likewise draw out the great and brave individuals like Anna, who are happy to help others and keep on keeping up their qualities and ethics regardless. Anna benevolently attempts to help the town in everything she can never really battle the plague.Throughout the plague year Anna thrives. Regardless of the awfulness of her two children and spouse passing she proceeds onward with her life and offer it to helping other people. anna builds up a feeling of character and freedom and starts to step up over the man centric principles of ladies around then, scrutinizing her confidence and society. Emergency of the plague additionally realized underhandedness, alongside those individuals who abuse the circumstance of death, dread and languishing. Jos misuses the residents w ho are now enduring gigantically, he covers individuals alive, takes their cash and family goods.He shows no respect for mankind in his corrupt conduct and is obviously determined by avarice and his own narrow minded wants. Dread and catastrophe can do numerous things to individuals. In Year of Wonders dread drew out the best and the most noticeably terrible in individuals. The locals dreaded demise and misfortune which was an incredible feeling. Times of emergency can change individuals and make beasts of us all. The tale shows how dread can misuse awful epople like Anna’s father and Jos. Be that as it may, in others can draw out the best, and improve an individual.

Beowulf †Anglo Saxon Culture Free Essays

Beowulf’s Strength and Fearlessness Anglo-Saxon verse mirrors their way of life and life. Verse is a wide piece of their lives, and a significant number of them went to the relatives through the verbal. From numerous verse told, â€Å"Beowulf† would be a top of the line case of the Anglo-Saxon lives. We will compose a custom article test on Beowulf †Anglo Saxon Culture or on the other hand any comparative subject just for you Request Now â€Å"Beowulf† is a sonnet about a daring saint who hears stories of a fearsome brute that destroyed a realm. Beowulf, the fundamental character, as a daring warrior, battles the monsters and recoveries the realm. Beowulf is intrepid and solid. These attributes show the estimations of the Anglo-Saxon culture. Beowulf was â€Å"the most grounded of the Geats† and â€Å"greater and more grounded than anybody anyplace is this world† (lines 110-111). This demonstrates Beowulf was more grounded than any Anglo-Saxon men. Beowulf likewise acknowledges himself that he is solid as well. He says, â€Å"He would never desert me, swim quicker/Across the waves than I could†¦Ã¢â‚¬  (274-275). He says this to demonstrate that he is most grounded everything being equal, and that nobody could beat him in anything. The significances in Beowulf’s extraordinary physical capacities uncover the estimation of solidarity in the Anglo-Saxon culture. Among the Danes and Geats, Beowulf is commended as the epic legend since he vanquishes the contemptible beasts, Grendel and his mother. Grendel and Beowulf would be complete alternate extremes of one another. Grendel is the devil who â€Å"snatched up thirty men, crushed them/Unknowing in their beds, and ran out with their bodies† (37-38). The individuals of Herot loathed Grendel for his butchering. At the point when Beowulf executes Grendel, Herot gains opportunity from the devil. That fundamentally makes Herot love Beowulf for his great deed. Beowulf â€Å"struck with all the quality he had left,/Caught her in the neck and slice it through,/Broke bones what not. † (641-643) and â€Å"then struck off/His head with a solitary blow. † (663-665). The butcher of Grendel and his mom spared Herot from its proceeding of dismal passings. Once more, Beowulf’s estimation of unimaginable quality uncovers the Anglo-Saxon culture. Beowulf was dauntless to the entirety of his adversaries and never lost a fight. He never relinquished any of them, and won triumph each time true to form. At the point when Beowulf initially shows up in Herot, he is approached to leave every one of his weapons. Beowulf says, â€Å"My master Higlac/Might consider less me on the off chance that I let my blade/Go where my feet were reluctant to, on the off chance that I covered up/Behind some expansive linden shield: My hands/Alone will battle for me, battle forever/Against the beast. † (170-175) Beowulf doesn’t need to resemble a frail legend by taking the entirety of his weapons, so he leaves his lances and fight shields behind. He doesn’t need his ruler to consider less himself. Beowulf underscores his boldness by leaving the entirety of his weapons behind. The champion of Beowulf’s bravery shows an Anglo-Saxon trademark. Beowulf likewise shows his valor during the festival after Grendel withdraws with his arm cut off. Beowulf says, â€Å"When we crossed the ocean, my confidants/And I, I definitely realized that all/My motivation was this: to win the cooperative attitude/Of your kin or kick the bucket in fight, squeezed/In Grendel’s wild grasp. Let me live in significance/And fortitude, or here in this corridor welcome/My demise! (364-369) Beowulf says that he would prefer to kick the bucket in Grendel’s hand in the event that he was unable to overcome him. He doesn't dread to surrender his life in a fight on the off chance that he can’t win. This shows Beowulf isn't frightful in any way, even before death. Beowulf’s activities toward death show boldness, an Anglo-Saxon trademark. From the sonnet â€Å"Beowulf†, the principle character, Beowulf shows quality and boldness, the attributes of the Anglo-Saxon culture when he initially shows up to Herot and when he crushes Grendel and his mom. Step by step instructions to refer to Beowulf †Anglo Saxon Culture, Essay models

Gawains Encounter with the Green Knight in the Green Chapel Essay

Gawain's Encounter with the Green Knight in the Green Chapel Despite the fact that little is thought about the creator of Sir Gawain and the Green Knight, it is viewed as perhaps the best sentiment ever. The sonnet recounts to the tale of one of Arthur's noblest and most gutsy knights, Sir Gawain, who is looking for the Green Chapel: Sir Gawain brilliantly consolidates two plots, regular in old stories and sentiment, in spite of the fact that not discovered together somewhere else: the decapitation challenge, in which two gatherings consent to a trade of blows with a blade or a hatchet, and the enticement, an endeavored temptation of the legend by a woman (Norton 200). The sonnet Sir Gawain and the Green Knight manages significant topics and thoughts, for example, nobleness, valor, knighthood, Christian beliefs, truth, enticement, and chasing among others. The sonnet is additionally a study [of] how effectively Gawain, as a man completely committed to Christian beliefs, keeps up those goals when he is exposed to bizarre weights (Norton 200). T he writer adequately utilizes scholarly gadgets, for example, similar sounding word usage, rhyme, incongruity, similitude, imagery, and symbolism to fortify his thoughts and topics. This entry of Sir Gawain and the Green Knight manages Gawain's experience with the Green Knight in the Green Chapel. The guide depicts the Green Knight as a major, savage, alarming beast. He reveals to Gawain that on account of his savagery, nobody needs to get in the region of the Green Knight. He cautions Gawain to not hazard his life by setting off to the Green Chapel, and guarantees him that he will cover everything. Be that as it may, Gawain must face the Green Knight and face the hit, since he is respectable, commendable, and valiant. He isn't a defeatist. He says to the guide, however you never told the story, on the off chance that I turned around... ...reen belt has otherworldly security and can spare his life. Gawain's disappointment shows that he also is human and has shortcomings. Works Cited Abrams, M. H. et al. The Norton Anthology of English Literature. Vol. 1. 6th Edition. New York: W.W. Norton, and Co. 1993. 200-254. Bobr, Janet. Inception. 1998. December 2, 1998.Online. Web. Accessible http: csis.pace.edu/grendel/prjs2f/gawain2.htm Finker, Leonid. Sir Gawain the Noble Knight. 1996. December 2, 1998. On the web. Web. Accessible http: csis.pace.edu/grendel/proj2a/sirgaw.html Hannabery, Brian. Sir Gawain and the Green Knight- - The presentation. 1998. December 2, 1998. On the web. Web. Accessible http: csis.pace.edu/grendel/prjs3b/intro.htm Sera, Joe. Sir Gawain and the Green Knight- - Close Reading of Lines 130-202. 1997. December 2, 1998. On the web. Web. Accessible http:csis.pace.edu/grendel/projs3f/proj2.html

Tips For Writing a PhD Thesis Proposal

Tips For Writing a PhD Thesis ProposalIf you want to get hired for a college or university position, there are some things that you should take into consideration before you start writing your thesis proposal. In this article, we will discuss some of the most common questions that people have about writing a thesis proposal.Writing a thesis proposal can be overwhelming, especially if you're working on a very detailed assignment, but it is something that should be done correctly. If you can follow this guide and learn how to properly structure a proposal, you will have a good chance of getting hired for an academic position and will put together a proposal that has lots of quality information.Two of the main types of proposals are the a-z. The first type is a draft, and you usually do not complete all of the information in the document. The other type is an actual proposal, which will give a more detailed description of what you want to write and your reasons for wanting to write it.T he first step in writing a proposal is to write down what you want to say in an outline. You will want to leave a little bit of room at the end of the outline for a few details so that you can revise your proposal.Once you have written out the main parts of your thesis, go over each paragraph of the proposal with a fine tooth comb and then check for spelling and grammar mistakes. This way, your proposal is going to be polished and organized in the beginning.After you finish, you may want to look over your paper and see if there are any areas that need improvement. If there are, then you can rewrite the paragraphs in question or you can add more detail.One of the most important steps in writing a thesis proposal is to make sure that the first paragraph contains a thesis statement, followed by four numbered bullet points. Ifthe first paragraph is too long, do not put too much information in the bullet points and do not include too many bullet points in the text box at the bottom of th e page.Remember that the last part of your full proposal should contain all of the necessary information. You will want to come up with a good thesis statement, then include your points in numbered bullet points.

Ecological Footprint Product - Free Essay Example

Ecological Footprint analysis has been conducted at a various levels such as nation, region, sector, company and product. There are various methodologies followed to analyze the ecological footprint depending on many factors. This part of the report addresses the ecological footprint methods. 4. Fundamentals Prior to conducting ecological footprint analysis, there are certain fundamentals which need to be covered. These are pre-requisite before the application of the methods of footprint. 4.1 Data Availability Data is one of the crucial factors for the Ecological Foot-printing. The data needs to be scooped and checked and compared with other available data for the area where the analysis is to be conducted. 4.2 Boundary Definition The boundary of the ecological footprint needs to be defined. The ecological footprint analysis faces boundary issues to include and exclude activities. There are two principles of defining a boundary of the study. 4.2.1 Geographical (administrative) boundaries This principle is based on whether the study should calculate footprints within the geographical or administrative border. For example, if the footprint study needs to be done for an airport in Germany, all the impacts due to the airport will be contributed to Germany by using Geographical boundary. 4.2.2 Responsibility boundaries The responsibility boundary is based on the consumption of an areas population irrespective of where the consumption occurs. For the same example of airport, in this case, only the impacts which are attributed to people in Germany will be included. Therefore, it is to be noted that the answers can be very different depending on the boundary condition we choose for our analysis to be conducted. 4.3 Double Counting Double counting should be avoided as it would unnecessary make the footprints bigger. There are many steps during ecological footprint analysis in which there are dangers of double counting. To avoid double counting, the processes should be clear and well defined. 5. Methods There are basically two methods to calculate the footprints. They are the compound or component-based methods which are explained in following sections. 5.1 Compound method Compound Method is the top-down approach. The compound method is applied primarily at the national or state level and utilizes national production, as well as import and export data to determine consumption and calculate the footprint. The procedure is mainly composed of following steps: 5.1.1 Consumption Analysis conversion to area Consumption analysis is conducted for biotic resources including meat, fruits, grains, dairy products so on. The consumption analysis is done for primary products and its derived secondary products. Primary Products Primary products are products which can be used directly or processed into secondary products like vegetables, unprocessed round wood etc. Consumption for primary product is calculated by production and adding imports and subtracting exports. The consumption quantities are converted into land area by their corresponding world average biotic productivity, or yield. At the national level, world average productivity is used for each land type to create a common base yield for inter-country comparisons. The consumption divided by the yield of that particular resource gives the area required to generate that consumption. The formula is given in slide 27 in annex 1. It should be noted here that further adjustments should be made to avoid double counting where necessary. For the double cropping lands, consumption should be considered only once as it will increase the footprint area. If the animals are grain fed, resource meat should be converted to arable land and not pastur e. Secondary products Secondary products are derived products like milk, paper etc. Secondary Products are converted into primary product equivalents for the purposes of Ecological Footprint calculations. The global conversion figure is used for imports of secondary products use the global conversion factor whereas national conversion factor is used for domestically produced goods. The weighted proportion of amount of products imported and produced domestically with their respective conversion factors are used to calculate the area of export. The formula is given in slide 28 in annex 1. The areas calculated by consumptions are converted to quantities of five specific ecological categories of lands and sea types including cropland, forest, pasture, built land, and sea according to which land types are required for production or assimilation of these items. For example, if the resource is grain, then the area is reflected as arable or cropland. The sum of footprints of all the products consu med within that category is the total Footprint. For example, the Footprint of cropland includes cereals for human consumption, cotton, processed oils, and fodder crops for livestock. Footprints are multiplied by equivalence factors to express the final footprint in global hectares. Each land type is assigned an equivalence factor that reflects its relative capacity to produce biomass. The different land types with varying productiveness are dealt by the use of equivalence factors. Hence the regions with varying quantities and composition of areas can be compared. 5.1.2 Energy Footprint Energy balance is determined by considering both local and direct use of energy and embodied energy in categories of traded goods. Embodied Energy is the energy used during a products entire life cycle in order to manufacture, transport, use and dispose of the product. The data for the embodied energy are well published and available. The UNs COMTRADE database with trade flows of more than 600 categories of productions are used to generate estimates of embodied energy. The embodied energy is given in terms of energy intensity (GJ/tonne). There are mainly two ways of translating the energy consumption to the energy land. Waste Assimilation / Carbon Sequestration The direct energy consumption is adjusted for carbon content according to the primary fuel used. The energy is translated into CO2 emissions using the national fuel mix profile of the producing country for exports, and using the world average fuel mix for imports. Carbon dioxide (CO2) emissions due to human activities are quantified. CO2 emissions from the consumption of energy are converted into footprint by considering the amount of land required to sequester CO2 emissions. The carbon sequestration method takes into account the assimilative capacity of forests by deducting the emission captured by oceans and assigns the necessary forest area. The area required is represented by: Area (ha) = CO2 Emissions (tons) * (1 à ¢Ã¢â€š ¬Ã¢â‚¬Å" fraction absorbed by ocean) / Sequestration Rate (tons/ha) Based on the above formula, the sequestration area is calculated by deducting the approximately one-third of anthropogenic emissions absorbed by the oceans from the total anthr opogenic emissions (IPCC, 2001). This method of carbon sequestration rate to convert into energy land is mostly used method. Biomass Substitution Another method for calculation of energy land is biomass substitution. The biomass substitution approach calculates the area needed to replace fossil fuels with their energy equivalent in fuel wood. The area is given by Area (ha) = Energy (GJ) / [Round wood yield (GJ/ha) * Expansion Factor (-)] Where; expansion factor accounts for additional biomass used for fuel from limbs, small trees etc. 5.1.3 Hydro Power and Nuclear Energy In ecological footprint, areas occupied by hydroelectric dams and reservoirs are taken into account as built area. The hydro power Footprint is calculated for each country using the average ratio of power output to inundated reservoir area for a selection of large dams for which both surface area and power output data are available. Currently, Nuclear Energy is considered same as fossil energy as omission would misinterpret the footprint thereby the ecological performance. 5.1.4 Summary The ecological footprint is summarized in six ecological categories. The footprints for individual consumption categories are aggregated to reach the total ecological footprint of the entity or population. The sum of Crop production, grazing, forestry, fisheries, and built-up areas are mutually exclusive and equals the total Ecological Footprint. The total is compared to how much bio capacity exists within a country. The whole structure of the footprint calculation is shown in Fig.1. Structure of Footprint and Biocapacity Calculations. The compound method depends on material flows at the national level and established trade data. National data gathers aggregate resource demand which doesnt require the information of end use. Therefore, compound method is more robust for comparisons between nations. With the same assumption and international data, different countries are compared. The World Wide Fund for natures (WWF) Living Planet Report (LPR) uses the compound method fo r Ecological footprint and presents it as one of two main indices to quantify changes in the state of the Earths ecosystems. The disadvantage of this method is it doesnt give any disaggregated data, so the sector wise footprint information cannot be derived. 5.2 Component Based Approach With the compound method, the consumption are estimated through analyses of material flows and activity components. Individuals or organizations consumption is combined in a bottom-up manner to the top required level. It incorporates basic life cycle data of relevant components for resource consumption and waste production. Emphasis is given to the activities rather than the cumulative resource use. This approach relies on sources that are more accessible to individuals and organizations. The main sources of data for the component method are raw data collection from the field and life cycle studies. For some activities, the Ecological Footprint values for certain activities are pre-calculated using data appropriate to that particular entity. The land use categories used for compound analysis are also used for component-based analysis. 5.2.1 Components The component method involves data collection from range of activities such as transport, energy use, materials and product consumption etc. The list of components impacts which are typically considered with this approach are: Direct Energy Food Material Waste Transport Water Built land It considers the effects of the above components or activities and converts these into equivalent land areas in global hectares (gha). 5.2.2 Conversion Factor/ Footprint of Component Conversion factors take into account all the activities necessary to the production of a particular resource. The application of life cycle analysis to the production of a product is fundamental in component footprint. This allows for a fuller picture of the impacts associated with material production and use as well as distinction between primary and secondary like manufactured products. The life cycle assessment data are required to derive the ecological conversion footprints for components. The conversion factor needs to take into account the transport, processing and agriculture energy. For material and transport elements, it further makes allowance for the embodied energy, the energy land etc need to be included. The data sources are more specific to the particular activity or area and that data collection is therefore also more time-consuming. Extra care has to be taken to avoid double-counting of impacts. Since component method is concentrated at detailed activity , it is more vulnerable to double counting. The conversion factors for certain activities are calculated taking into account related factors like transportation, processing, maintenance etc. Some example of the pre calculated values are given in presentation slide 37 in the annex 1. 5.3.3 Summary Since many people can identify with the activities of component, the component method is simplistic and educative. The activities like production of waste and the consumption of electricity etc are built around peoples daily routine, and people can participate and understand them. This method has the benefit of greater local transparency, which facilitates comparisons between impacts of different activities and experimentation with possible sustainability scenarios. However, the comprehensive component list and reliability of the life-cycle assessment (LCA) and determines the overall accuracy of the final result. Hence, this approach has dangers of producing inaccurate results due to incomplete and inaccurate information. Colorado College conducted ecological footprint using component based approach. The method for calculation and assumption are given in their report. Another example is Regional Stepwiseà ¢Ã¢â‚¬Å¾Ã‚ ¢ developed by Best foot forward organization based on component approach to find the ecological footprint of a region or community. 6. Limitations Ecological footprint doesnt consider the loss of productivity from soil erosions. It excludes effect of pollution, toxic. Resource and waste flows that cannot be measured are excluded from the assessment. Many activities excluded from the ecological footprint is already described in chapter 3. The accuracy of the conversion factors and footprints itself are constrained by data quality and availability. Proxies are used which may reflect true activity but they are not as reliable as primary data. Thus proxies reduce the reliability of the footprints calculated. There are some potential errors types of errors such as data errors, assumption errors, systematic misinterpretations etc in the ecological footprint which is important in checking the validity and reliability of the ecological footprint results. Conclusion The ecological footprint methodology is undergoing significant development and regularly incorporates new data and scientific knowledge as it becomes available. The Global Footprint Network is continually improving the methodology through the National Footprint Accounts. Careful planning is required before footprint project in order to determine the best methodology to adopt. The choice of method is determined primarily by scale and data availability and the purpose of foot printing. Each method has its benefits and uses. Component methods allow detailed footprints but may be unreliable as data quality is questionable. On the other hand Compound foot printing may result in a more robust overall value but the disaggregated subcomponents may be unreliable. The combination of methods can be used for footprint calculation to explore the possibility of applying the best elements of each method. The component method that is combined with compound Ecological Footprints assess ment can overcome the weaknesses of respective methods. Numerous Studies for organizational, municipal and regional are conducted by calibrating component-based estimates on past and present compound national. References Chambers N, Simmons C, Wackernagel M (2000): Sharing Natures Interest: Ecological Footprints as an indicator of sustainability, Earthscan, London McLoone A et al (- ): The Ecological Footprint Analysis of SMEs within Mid-West region of Ireland, University of Limerick, Ireland. Wackernagel M. et al (2007): Current Method for calculating National Ecological Footprint Account, 2007, Science for Environmental and sustainable society, Vol 4. No1, Research Center for Sustainability and Environment Shiga University Wackernagel M et al (2005): National Footprint and Biocapacity Accounts 2005: The underlying calculation method, Global Footprint Networks Wright P. E (2002): Ecological Footprint of Colorado College: An Examination of sustainability , Colorado https://www.coloradocollege.edu/sustainability/EcoFootprint.pdf 12/11/2007 Ecological Footprint Modeling : https://www.rprogress.org/energyfootprint/eco_footprint/ 15/11/2007 Footprint Methodology : https://www.f ootprintnetwork.org/gfn_sub.php?content=datamethods 30/10/2007 Stepwise Methodology : https://www.bestfootforward.com/regionalstepwise.html#desc 12/11/2007 Summary of Book Sharing Natures Interest: https://www.bestfootforward.com/ecologicalfootprints/sni%20-%20ch1.htm 10/11/2007 Technical Report on Methodology : https://www.steppingforward.org.uk/tech/index.htm 5/11/2007 https://www.census.gov/main/www/popclock.html 24/11/07 https://www.earthsummit2002.org/es/life/2002.pdf 20/11/07 https://www.footprintnetwork.org/gfn_sub.php?content=glossary 18/11/07 WWF, Living Planet Report (2002); https://assets.panda.org/downloads/lpr2002.pdf 23/11/07 Annex 2: Equivalence Factors and Yield factors